230
layers of purifying material, each having a superficial area of 1 square foot, are the minimum necessary for the treatment of 100 cubic feet of gas per hour, irrespective of the nature of the purifying material and of the impurity it is intended to extract. If there is any sound basis for this generalization, it should apply equally to the purification of acetylene, because there is no particular reason to imagine that the removal of phosphine by a proper substance should occur at an appreciably different speed from the removal of carbon dioxide, sulphuretted hydrogen, and carbon bisulphide by lime, ferric oxide, and sulphided lime respectively, Using the coal gas figures, then, for every 10 cubic feet of acetylene generated per hour, a superficial area of (4 x 144 / 10) 57.6 square inches of purifying material is required. In the course of Keppeler's research upon different purifying materials it is shown that 400 grammes of heratol, 360 grammes of frankoline, 250 grammes of acagine, and 230 grammes of puratylene each occupy a space of 500 cubic centimetres when loosely loaded into a purifying vessel, and from these data, the following table has been calculated:
__________________________________________________________ | | | | | | | Weight | Weight | Cubic Inches | | | per Gallon | per Cubic Foot | Occupied | | | in Lbs. | in Lbs. | per Lb. | |_____________|____________|________________|______________| | | | | | | Water | 10.0 | 62.321 | 27.73 | | Heratol | 8.0 | 49.86 | 31.63 | | Frankoline | 7.2 | 41.87 | 38.21 | | Acagine | 6.0 | 31.16 | 55.16 | | Puratylene | 4.6 | 28.67 | 60.28 | |_____________|____________|________________|______________|
As regards the minimum weight of material required, data have been given by Pfleger for use with puratylene. He states that 1 Kilogramme of that substance should be present for every 100 litres of crude acetylene evolved per hour, 4 kilogrammes being the smallest quantity put into the purifier. In English units these figures are 1 lb. per 1.5 cubic feet per