110
p>Another good material is celluloid sheets, which, when cut into proper strips, is dipped in hot water, for bending purposes, and it readily retains its shape when cooled.
RUBBER--Suitable rubber for the strips are readily obtainable in the market. Experiment will soon show what size and lengths are best adapted for the particular type of propellers which you succeed in making.
PROPELLER SHAPE AND SIZE.--A good proportion of propeller is shown in Fig. 89. This also shows the form and manner of connecting the shaft. The latter A has a hook B on one end to which the rubber may be attached, and its other end is flattened, as at C, and secured to the blade by two-pointed brads D, clinched on the other side.
Fig. 89. Shape and Size.
The collar E is soldered on the shaft, and in practice the shaft is placed through the bearing hole at the end of the frame before the hook is bent.
SUPPORTING SURFACES.--The supporting surfaces may be made perfectly flat, although in this particular it would be well to observe the rules with respect to the camber of large machines.
CHAPTER XV
THE AEROPLANE IN THE GREAT WAR
DURING the civil war the Federal forces used captive balloons for the purpose of discovering the positions of the enemy. They were of great service at that time, although they were stationed far within the lines to prevent hostile guns from reaching them.
BALLOON OBSERVATIONS.--Necessarily, observations from balloons were and are imperfect. It was found to be very unsatisfactory during the Russian-Japanese war, because the angle of vision is very low, and, furthermore, at such distances the movements, or even the location of troops is not observable, except under the most favorable conditions.
Balloon observation during the progress of a battle is absolutely useless, because the smoke from the firing line is, necessarily, between the bal
